FAZE Electronics

Solder Pot

A new and much improved solder pot is under way.  Five prototypes were made and was almost

immediately takenby customers. 

They are square and can be used for soldering small PCB's in instead of the large solder bath. 

Pictures and new information will follow soon.

A true production Solder Pot for -FAST- tinning wire and cable-ends, or soldering small PCB's.

Lugs or Ferules can be soldered directly onto cables by hooking the ferule with SS wire or

simply hold in place with a suitable long-nose pliers when dipping.

Cover w crimp sleeving (Pic) to give a finishing touch.

For more solder on the wire ends, reduce temperature, ie. For wire to PCB soldering

For less solder, increase temperature, ie. For terminal insertion.

Transformer winders use our pots to tin the red (and yellow) insulation copper wire

ends before it gets soldered to the transformer tabs. Note that the brown insulation

copper wire temperature is too high to be tinned with the Solder Pot – a special tool is

available for removing the brown insulation.

Using the Solder pot.

Pre-strip the wire or cable ends you want tinned

(Pic of stripped wires, cables and lugs, small PCB)

Method is to bunch the wires, level wire ends

(pic of dipping wire in flux)

dip in suitable solder flux

(Pic of wire bundle dipped in solder pot)

Pic of wires throwed on newspaper

To give you an idea of the time saving involved – A bunch of 50 wires takes a few

seconds to be tinned in the Solder Pot. Do the math.

throw wire bunch onto a piece of newspapers to break apart touching wire-ends.

Supply 230VAC, Element 1000W, embedded in solder for minimum energy loss, Supply Current 4A,

Pot Material Stainless Steel, Pot Capacity 4Kg Solder, Top Opening +/- 89mm Diameter,

Soldering Depth up to 75mm, Temperature Sensing Thermocouple Type K (Chromel vs. Alumel),

Control Micro Processor, Accuracy +/- 1º C, Max. recommended temperature 350 º C,

Temperature Measurement Multimeter directly on TC output, Rated continuos

Guarantee: One Year, excl. i.e. acts of God

WARNING: Using an acid based flux will cause excessive corrosion and failure of the appliance.

Warranty will be void. Use recommended types of solder fluxes only!

LEAD-FREE SOLDER READY

FAZE Electronics Design & Manufacture Commercial and Industrial Electronics

Phone +27 12 661 4751

Fax +27 12 661 9949

Mobile 082 456 6925

E-Mail

FAZE Home